| Environmental Hazards
My job as your professional home inspector is to alert you, to the extent possible, to unknown problems and potential environmental hazards in your current or potential house. Just because some of these hazards may be invisible, this does not mean they call for less vigilance on your part. Mine is a non-invasive visual inspection of your property. While I may be able to alert you to possible problems, my basic inspections are no substitutes for specialized contaminant testing.
|
The first thing to understand about mold is that there is a little mold everywhere indoors and outdoors. It's in the air and can be found on plants, foods, dry leaves, and other organic materials.
It's very common to find molds in homes and buildings. After all, molds grow naturally indoors. And mold spores enter the home through doorways, windows, and heating and air conditioning systems. Spores also enter the home on animals, clothing, shoes, bags and people.
When mold spores drop where there is excessive moisture in your home, they will grow. Common problem sites include humidifiers, leaky roofs and pipes, overflowing sinks, bath tubs and plant pots, steam from cooking, wet clothes drying indoors, dryers exhausting indoors, or where there has been flooding.
Many of the building materials for homes provide suitable nutrients for mold, helping it to grow. Such materials include paper and paper products, cardboard, ceiling tiles, wood, and wood products, dust, paints, wallpaper, insulation materials, drywall, carpet, fabric, and upholstery.
|
|
|
|
Everyone is exposed to some amount of mold on a daily basis, most without any apparent reaction. Generally mold spores can cause problems when they are present in large numbers and a person inhales large quantities of them. This occurs primarily when there is active mold growth.
For some people, a small exposure to mold spores can trigger an asthma attack or lead to other health problems. For others, symptoms may only occur when exposure levels are much higher.
|
|
|
|
Yes. If indoor mold is extensive, those in your home can be exposed to very high and persistent airborne mold spores. It is possible to become sensitized to these mold spores and develop allergies or other health concerns, even if one is not normally sensitive to mold.
Left unchecked, mold growth can cause structural damage to your home as well as permanent damage to furnishings and carpet.
According to the Centers for Disease Control*, "It is not necessary, however, to determine what type of mold you may have. All molds should be treated the same with respect to potential health risks and removal."
|
|
|
|
Yes. An indoor air sample can be taken as well as an outdoor sample to determine whether the number of spores inside your home is significantly higher. If the indoor level is higher, it could mean that mold is growing inside your home. Reliable air sampling can be expensive, time consuming, and requires special equipment and a qualified technician.
If you can see or smell mold, then you should take steps to clean-up the mold. Mold growth is likely to continue unless the source of moisture is removed and the contamination is cleaned-up.
|
|
|
|
First address the source of moisture that is allowing the mold to grow. Then take steps to clean-up the contamination. Here are helpful links to lean more about cleaning-up mold in your home.
|
LEAD
Lead is a highly toxic metal used for many years in products in and around homes. Lead’s adverse health effects range from behavioral problems and learning disabilities to seizures and death. Because their bodies are growing quickly, children age 6 and under are at greatest risk. Primary sources of lead exposure for children are deteriorating lead-based paint, lead-contaminated dust, and lead-contaminated residential soil. Lead might be present in any home built up until the 1940s. Rarely found in source water, lead can enter tap water through corrosion of plumbing materials. Homes built before 1986 are more likely to have lead pipes, joints, and solder. New homes are also at risk: even legally “lead-free” pipes can contain up to 8 percent lead and leave significant amounts of lead in the water for the first several months after installation. Since the 1980s, EPA and its federal partners have banned or limited lead used in consumer products, including residential paint. Federal regulations limiting the amount of lead in paint sold for residential use started in 1978. If your property was built before 1978 or you are considering remodeling, renovating, or repair, you may wish to think about lead inspection. Water quality can be compromised by such other trace elements as iron, excess acidity, manganese, calcium, magnesium, mineral salts, hydrogen sulphide, selenium, chromium, arsenic, mercury, and cadmium.
Excerpts from U.S. Department of Environmental Protection, “Lead in Paint, Dust, and Soil”.
RADON
Radon is a radioactive gaseous element produced in the disintegration of radium, a radioactive metallic element. It cannot be detected by the senses and can be confirmed only by sophisticated instruments and laboratory tests. The gas enters a house through pores and cracks in the concrete or through floorboards of poorly ventilated crawlspaces, especially when wet ground allows the gas to escape easily through the soil and disperse in the atmosphere. Radon is a lung carcinogen: the National Academy of Sciences estimates radon causes some 15,000 to 22,000 lung cancer deaths annually. The U.S. Surgeon General and the EPA recommend all houses be tested for radon. Houses with high radon levels can be fixed.
Excerpts from U.S. Environmental Protection Agency, “Indoor Radon”.
WOOD-DESTROYING ORGANISMS/INSECTS
Termites, which play a positive role in recycling wood and plant material, become a problem when they consume structural lumber. Every year thousands of U.S. housing units require termite treatment. These pests cause serious damage to wooden structures and posts and can also attack stored food, household furniture, and books. Successful termite management requires special skills, including a working knowledge of building construction and an understanding of termite biology and identification. In most cases, it is advisable to hire a professional pest control company for the inspection and control problem.
Wood-boring beetle larvae feed on wood and wood products. Adults of some species bore holes into plaster, plastic, and soft metals. Many species cause problems when emerging from wood in newly constructed buildings because they leave small circular or oval exit holes in the wood. To avoid these problems, infested wood must be kiln-fried before being used for lumber. The species Deathwatch Beetles is primarily found in soft woods (girder, beams, foundation timbers, some types of furniture, with some species attacking books). False Powerpost female beetles bore a tunnel, or egg gallery, into wood or other materials, then deposit eggs in pores or cracks within the tunnel. Adults of some species bore through such soft metal as lead and silver, as well as plaster and other non-wood materials. Affected structural wood should be removed and replaced whenever possible.
Wood Wasps and Horntails. Wood wasp damage in buildings is likely to be more cosmetic than structurally weakening. Emerging wood wasps can chew through any substance: wallboard or plaster walls, hardwood floors, carpeting, linoleum, non-ceramic floor tiles, and other interior surfaces.
Carpenter Ants. Several species can damage wood in building and other structures. Though ants don’t eat wood, they bore into it to make their nests, sometimes causing serious structural damage. Also, they nest in hollow doors, cracks and crevices, furniture, wall voids, and termite galleries. New building infestation occurs when land-cleaning in the area disturbs existing native colonies.
Excerpts from University of California Agriculture & Natural Resources, UCIPMOnline, “Statewide Pest Management Program”.
|
|
